Stationary High Power Cell Phone Signal Blocker for 5G GPS WiFi RC Frequencies 100m

$2561.78$1456.93
  • SKU:T-18Pro
Online store: In stock
Free Shipping (Usually shipped by USPS, DHL, LaserShip...)
The above prices include everything (VAT, customs fees...)
Most packages are shipped within 3 days
Found it cheaper? We'll lower the price!

The T-18Pro takes desktop signal jamming performance to a higher level, following the foundation of the previous 90W Desktop Cell Phone Jammer with several important upgrades.

The most significant improvements are:

  • Total power: 90W → 142W;
  • Jamming range: 80m → 100m;
  • Antennas system: 12 (2–3 dBi) → 18 (6–7 dBi).

And stationary cellular phone jammer retains the design allowing each antenna to be individually adjusted or switched off for any specific frequency band via its corresponding knob, and also comes with a remote control.

Supporting up to 18 frequency bands, the T-18Pro wireless network blocker covers a wide range of wireless signals.

Antennas Frequency Band Frequency Range Output Power
1 CDMA 850 850-960 MHz 10W
2 GSM 1900 1805-1880 MHz 10W
3 3G 2110–2170 MHz 10W
4 4G LTE 700–803 MHz 10W
5 4G WiMAX 2496–2690 MHz 10W
6 5G1 3600-3800 MHZ 10W
7 5G2 1427-1518MHZ 10W
8 5G3 617–698 MHz 8W
9 GPS L1 1570-1620 Mhz 8W
10 GPS L2+L5 1170-1280 MHz 6W
11 GPS L3+L4 1370-1390 MHz 6W
12 WiFi 2.4G 2400–2500 MHz 8W
13 5.2G WiFi 5150-5350 MHz 6W
14 5.8G WiFi 5725-5850MHz 6W
15 LOJACK 165–175 MHz 6W
16 RC315 315 MHz 6W
17 RC433 433 MHz 6W
18 RC868 868 MHz 6W

We support frequency customization based on your specific needs; please feel free to contact us, and we will respond within 24 hours!

And mobile phone and GPS scrambling device for workplace is equipped with more powerful, long-range external high-gain (6–7 dBi) omnidirectional antennas (covering the downlink frequencies for all transmission bands).

The total output power reaches up to 142 W, and under ideal conditions, the maximum nominal coverage range is 100 meters.

The cooling system is another major improvement, and it maintains low noise levels.

Internal cooling is handled by 8 temperature-controlled fans

The chassis uses a fin-style heat sink structure to increase the available heat-dissipation area.

Two larger external fans provide additional airflow around the jammer.

18 Antennas Cell Phone Jammer's Specifications:

Specification Details
Total Output Power 142W (6–10W per band)
Jamming Range 50–100 meters (depending on the signal strength in the area)
Power Supply AC 110V/220V, DC 24V
(For vehicle use, please use a power supply rated at ≥260 watts)
Weight 9.8 kg
Dimensions 390mm × 290mm × 90mm
Working Time Supports 24/7 continuous operation when connected to mains power

Correct procedure for powering on:

First, correctly connect all antennas to the device and connect the power adapter.

Next, toggle the device's main power switch to the "ON" position, then point the remote control at the device's receiver and press the "ON" button to turn the device on.

Please note that you must check if a button cell battery is installed in the remote control; if not, please insert a suitable button cell battery.

If the device does not respond, please check if a button cell battery is installed in the remote control (if not, please insert a suitable button cell battery).

CR2025E Button Cell Battery

Similar Items